Create Map (Easy) Toolbar - Lowrance MapCreate 6 Installation And Operation Instructions Manual

same time.] To display additional toolbars or remove one from your
screen:
1. Click
V |T
IEW
played in the box to the left of the toolbar's name. If the toolbar is not
active, the box is empty.
2. To view a toolbar click the box beside the name of the toolbar you
want to display. A check mark appears, and the toolbar is displayed on
your screen.
3. To remove a toolbar click the check box beside the name of the tool-
bar you wish to close. The check mark disappears, and the toolbar is
removed from your screen.
4. Repeat the procedure for each toolbar you wish to display or remove.
At left, the Create Map (Advanced) toolbar is checked, so it is active, or
visible. The figure at right shows that all four toolbars are active. To
remove a toolbar, simply click the check mark.
The tables below describe the commands on each toolbar.
NOTE:
The Create Map toolbar allows you to choose between an easy ver-
sion and an advanced version (both described next).
. A toolbar is active when a check mark is dis-
OOLBARS

Create Map (Easy) toolbar

Draw Map Border: draws map borders as green
rectangles.
Delete Map Border: clicking anywhere on the
map border or on any black handle box with this
tool removes the border from your map.
Estimate Map Size: predicts file size from cur-
rent borders.
36