Installing Mapcreate - Lowrance MapCreate 6 Installation And Operation Instructions Manual

Custom - Allows installation of the program and all map data
Full -
For Compact or Custom installations of version 6.3: the high detail map
data is organized into multiple regions recorded on different CDs. The
manual addendum shipped with your MapCreate package contains a
map showing which region is on which CD. Refer to the map to help you
decide what regions to install on your hard drive.

Installing MapCreate

For best performance, we suggest you uninstall previous versions of
MapCreate before installing version 6.3. To install MapCreate, follow
these steps:
WARNING:
You must close all other open applications and temporarily disable
any virus scan software before you install MapCreate. Some virus
scanning programs will cause undefined error messages and pre-
vent MapCreate from installing correctly. If strange errors occur
during install, make sure virus scan software is off, then reinstall
MapCreate. When installation is finished, remember to turn your
virus scan software back on only after your computer has rebooted
and MapCreate and the card reader are installed.
1. Insert the USA-West CD-ROM (or disc 1) into the computer's drive.
2. The MapCreate 6.3 setup program should start automatically and
you can skip to step 5. If it does not, click the Windows
ton.
dium-detail map data. Takes approximately 300 MB
of free hard drive space.
files on the hard drive. Caution: Be patient if you
choose custom install. It may take several minutes for
all the files to install to the hard drive. You will be
prompted to insert the appropriate disc(s) throughout
the installation.
Installs every possible option and all the mapping
data. MapCreate runs fastest with this option. Cau-
tion: Be patient if you choose full install. It may take
several minutes for all the files to install to the hard
drive. You will be prompted to insert the appropriate
disc(s) throughout the installation..
18
| but-
S R
TART UN