JVC AV-48WP30 User Manual page 23

The remote control is programmed with VCR codes for power on, power off, play, slop, fast-for-
ward, rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other Z-way selector switch to 'VCR".
3) Press and hold down the
DISPLAY
button.
4) With the
DISPLAY
button held down, enter the first code number listed with the 'IO key pad.
5) Release the
DISPLAY
buiton.
6) Confirm the operation of the VCR.
s If your VCR does not respond to the first code, try the others listed. If it does not respond to
any code, try the Search Codes Function, on page 25.
* Some manufacturer's VCR's may not respond to the Tv/vcn button, even if other buttons work
properly.
a To record, hold down the
REC
button on the remote and press
PLAY.