JVC AV-48WP30 User Manual page 13

~1 If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to
- If you have a cable sy
the use of a cable box to access all the
channels, please refer
- If you have a cable sy
the use of a cable box to
premium channels, bu
channels, please refer to
~~~~t~~~~ You may omit the VCR from your connections if you wish.
nneding a VCR only, please see fhe Quick Setup on page 9.
ng POP, please see page 54.
1) Connect an RF Cable from the wall outlet into the RF Cable In on the back of the TV.
Cable or Antenna
OUtpUt
TV Rear Panel
(RF Input)
'1) Connect an RF Cable from the wall outlet info the RF Cable In on the Cable Box.
2) Connect an RF cable from the Cable Out on the cable box into fhe RF Cable In on the back
of the TV.
* Please see page 54 for more information on using the POP feature with a cable box.