JVC AV-48WP30 User Manual page 22

You can program your remote to operate your cable box, satellite receiver, VCR or DVD play
er by using the instructions and codes listed below. If the equipment does not respond ta
any of the codes listed below or to the code search function, use the remote control supplied
by the manufacturer.
Ca QEP
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATVISatellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the
BISPLAY
button.
4.) With the
DISI-'LAY
button held down, enter the first code number listed using the 10 key pad.
5) Release the
DISPLAY
button.
6) Confirm the operation of the Cable Box/Satellite receiver.
3 If your CATV or Satellite box does not respond to the first code, try the others listed. If it does
not respond to any code, try the Search Codes Function, on page 25.
Satellite
104
-___-
105
102, 103
---
108
106 109 ii0
-L-.-L--
106,109.110
-._.-
107
104.108
101
102. io3