Lowrance GlobalMap 5150C Operation Instructions Manual page 70

1.
1.
Route creation sequence (left to right): Fig. 1. Set route waypoint (1) at
the cove entrance. Fig. 2. Move cursor northeast to set point (2) at
channel entrance. Fig. 3. With point (2) set, move cursor southeast to
mark channel exit with waypoint (3). In figures 2 and 3, notice the
rubber band line extending from the previously set waypoint to the
cursor. This line will become the course for the route.
4.
Route creation sequence, continued: Fig. 4. Point (3) set at channel
mouth. Fig. 5. Waypoint (4) set further south along the beach, at a rec-
ognizable landmark (Bob Hall Pier). Waypoint PLFM Q W ends the
route at an oil platform some distance from the shore. Fig. 6. Press
EXIT to save the route and you return to this screen.
6. Move the cursor to the next point in the route, a spot where you need
to turn or change direction, and press
7. Repeat step six until the route reaches your destination.
2.
2.
5.
to set the next waypoint.
ENT
64
3.
3.
6.