Lowrance GlobalMap 5150C Operation Instructions Manual page 57

Visible
Active
symbol
symbol
Sequence for saving a trail and beginning a new one. My Trails com-
mand (left). The Trails Menu (center). The arrow to the right of Trail 3
indicates the trail is "active," and the check to the left indicates the
trail is visible on the map display. The third figure (right) shows the
Edit Trail menu, with the Name command selected.
To Save a Trail
1. Press | |↓ to | .
MENU MENU M T ENT
Y RAILS
2. Press ↓ to the Active Trail Name|
.
ENT
3. Press ↓ to | . This unchecks the Active option.
A ENT
CTIVE
4. To return to the previous page, press repeatedly. As you leave
EXIT
the Edit Trail menu, you will notice that a new trail starts with a new
sequential number. In the example figure below, the new trail is num-
ber 4, showing zero points. Note that Trail 3 is inactive, but it is still
visible on the map.
New trail, named "Trail 4," is created when Trail 3 is made inactive.
Any new travel will be recorded in this trail, which is active and visi-
ble. Trails do not need to be visible in order to be active.
51