Lowrance GlobalMap 5150C Operation Instructions Manual page 125

A. To navigate to the waypoint, press . (The Go To Waypoint com-
ENT
mand is already highlighted.) The unit will show navigation informa-
tion to the waypoint.
B. To find the waypoint, press → to | . The Map Page
F O M ENT
IND N AP
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go To Waypoint command se-
lected (left). Find on Map selected (right).
To clear these menus and return to the previous page, press re-
EXIT
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press | . B. Or you can jump
ENT ENT
down to the lower selection list by pressing , then press ↓ or ↑ to
ENT
select a waypoint from the list, then press . The waypoint informa-
ENT
tion screen appears.
119