Front Panel -- Port Led Indications; Bank 7-Seg Led; Hot Plug; Figure 16. Front Panel - Cablematic KV01 User Manual

3.4

Front Panel -- Port LED Indications

8 Ports
16 Ports
There are two LEDs for each port:
■ The Red LED on indicating a powered-on Computer is connecting to the port. Notice the PC99
Computer always power on the PS/2 ports even if the Computer is not power on, so the red LED
will turn on.
■ The Blue LED on indicating the port has been selecting. The blue LED flashing if there is no
Computer connected to the port.
Press "BANK" button and the port button simultaneously will reset the KVM switch.
3.5

BANK 7-seg LED

7-Segment BANK LED Indication
When you want to view the next bank KVM switch, please press "BANK" push button repeatedly
to the destination bank. The bank LED will be changed from bank 1 to the maximum daisy chain
level and then to bank 1 again.
Bank 1 Bank 2
3.6

Hot Plug

The KVM Switch supports "Hot Plug" function for any non-PS/2 connectors. You may Hot Plug the
USB mouse or USB keyboard as you like.
Note:
■ DO NOT hot plug PS/2 port.
■ Some O.S. (Operation Systems) like SCO Unix or Linux does not support "Hot Plug"
function. If you apply "Hot Plug" to this kind of O.S., it will cause unpredictable
behavior or shut down the Computer. Before attempting to use "Hot Plug", please make
sure your O.S. and mouse software driver support the "Hot Plug" function.
Figure 17. Front Panel
Bank 3 MAX. BANK
16 / 19
1+1 Console Combo KVM Switch