Console Installation; Local Console; Figure 10. 3-In-1 Db15 Cable And Ps/2 To Usb Adaptor; Figure 11. Local Console Installation - Cablematic KV01 User Manual

(a) PS/2 computer --- Plug in the PS/2 mouse connector to the computer mouse port, then the PS/2
keyboard connector to computer keyboard port.
Figure 11. 3-in-1 DB15 Cable and PS/2 to USB Adaptor
(b) USB computer --- Install a PS/2-to-USB adapter to the keyboard PS/2 connector, plug in USB
connector to the PC USB port. This single USB port can handle both keyboard and mouse data.
2.3

Console Installation

2.3.1 Local Console

Connect the monitor to the HDB15 female port on the back of the KVM unit labeled with the
monitor symbol at the Local Console connector.
There may be USB local console or PS/2 local console. For USB local console, connect the USB
keyboard to either one of USB local port and USB mouse to the other USB port. These USB ports
are special designed for keyboard and mouse, and can not work with USB hub or other USB
devices. For PS/2 local console, connect keyboard to purple PS/2 port and mouse to green PS/2
mouse port. There is a Daisy chain port under VGA ports.
Figure 12. Local Console Installation
10 / 19
1+1 Console Combo KVM Switch