Optional Modules Installation; Ip Module; Cat. 5 Transmitter Module; Figure 12. Ip-Module - Cablematic KV01 User Manual

1+1 Console Combo KVM Switch
2.4

Optional Modules Installation

2.4.1 IP Module

Please refer to "IP KVM Module User Manual" for details.
IP Remote Console
Installation: Power off the KVM switch firstly. Remove the cover of the add-on slot, slide in the
IP Module and make sure the module is fully inserted into the slot.
The IP Module redirects local keyboard, mouse and video data to a remote administration console.
It allows
you to control one or many computers locally at the server site or remotely via the Internet using a
standard browser.
Figure 13. IP-Module
Serial Power Control
The IP Module comes with a serial port for connecting to any serial device, such as serial PDU to
provide remote power control, such as power on, power off, and power cycle for the connected
computers/servers.

2.4.2 CAT. 5 Transmitter Module

CAT. 5 Remote Console
Installation: Power off the KVM switch firstly. Remove the cover of the add-on slot, slide in the
CAT.5 transmitter module and make sure the module is fully inserted into the slot.
To extending your console up to 1000 feet away by connecting the CAT. 5 cable to the R-Box in the
remote end.
11 / 19