Table of Contents
Advertisement
5
Troubleshooting
18
Troubleshooting
Troubleshooting
No woofer sound
You can set up wireless connection manually, when
your connection is not completed.
1. Adjust volume level of the main unit to
minimum.
- "VOL MIN" appears on the display window.
2. Press and hold
for about 3 seconds.
- "W RESET" / "WL RESET" appears on the display
window briefly.
5
3. If the LED of the wireless subwoofer already
blinks in green continually, you can skip this
step. Press and hold PAIRING on the back of the
wireless subwoofer for more than 5 seconds.
- The LED of the wireless subwoofer lights up
alternately in red and green.
LAS651M.BUSALLK_SIM_ENG_6763.indd 18
VOL
(MUTE) on the remote control
VOL
or
Red
Green
4. Disconnect the power cord of the main unit
and the wireless subwoofer.
5. Connect them again after the LED of the main
unit and the wireless subwoofer is fully turned
off. The main unit and the wireless subwoofer
will be paired automatically when you turn on
the main unit.
- When the connection is completed, you can
see the green LED on the subwoofer.
Green
2015-02-25
3:19:30
Advertisement
Table of Contents
