Subwoofer Phase - Yamaha RX-V500D Owner's Manual

❑ Crossover
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to "Small". A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers.
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.

❑ Subwoofer Phase

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the
subwoofer phase.
Settings
Normal (default) Does not reverse the subwoofer phase.
Reverse Reverses the subwoofer phase.
❑ Extra Bass
Sets the speakers to produce the front channel low-frequency components.
Settings
Only the front speakers produce the front channel low-frequency
Off (default)
components.
Both the front speakers and subwoofer produce the front channel
On
low-frequency components.
• This setting is not available when "Subwoofer" is set to "None", or when "Front" is set to "Small".
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
73
En