Yamaha RX-V500D Owner's Manual page 107

Audio Section
• Rated Output Power (2-channel driven)
(20 Hz to 20 kHz, 0.09% THD, 6 )
Front L/R .................................................................80 W+80 W
• Rated Output Power (1-channel driven)
(1 kHz, 0.9% THD, 6 )
Front L/R .................................................................... 115 W/ch
Center ....................................................................... 115 W/ch
Surround L/R.............................................................. 115 W/ch
• Dynamic Power (IHF)
Front L/R (6/4/2 ) ............................................ 110/130/160 W
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 ............................. 120 or more
• Input Sensitivity / Input Impedance
AV 5 etc. (1 kHz, 100 W/8 )..............................200 mV/47 k
• Maximum Input Signal
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ........................... 2.3 V
• Output Level / Output Impedance
AV OUT ..............................................................200 mV/1.2 k
SUBWOOFER ...........................................................1 V/1.2 k
• Headphone Jack Rated Output / Impedance
AV 5 etc. (1 kHz, 50 mV, 8 ) .............................100 mV/470 
• Frequency Response
AV 5 etc. to Front (10 Hz to 100 kHz) ......................... +0/-3 dB
• Signal to Noise Ratio (IHF-A Network)
AV 5 etc. (Input Shorted 250 mV, Speaker Out)
..........................................................................100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out)......................................150 µV or less
• Channel Separation
AV 5 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz)
................................................................. 60 dB/45 dB or more
• Volume Control
Range ............................................. MUTE, -80 dB to +16.5 dB
Step ................................................................................ 0.5 dB
• Tone Control Characteristics
Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz
Bass Turnover ............................................................... 350 Hz
Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz
Treble Turnover..............................................................3.5 kHz
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
H.P.F. (Front, Center, Surround)................................ 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
Video Section
• Video Signal Type............................................................... PAL
• Video Signal Level
Composite ............................................................. 1 Vp-p/75 
Component
Y ......................................................................... 1 Vp-p/75 
Pb/Pr................................................................ 0.7 Vp-p/75 
• Video Maximum Input Level ...........................1.5 Vp-p or more
• Video Signal to Noise Ratio ................................ 50 dB or more
• Monitor Out Frequency Response
Component............................................ 5 Hz to 60 MHz, -3 dB
DAB Section
• Tuning Range .................................. 174 to 240 MHz (Band III)
• Support Audio Format
......................... MPEG 1 Layer II/MPEG 4 HE AAC v2 (AAC+)
• Antenna ......................................................... 75  unbalanced
FM Section
• Tuning Range .......................................... 87.50 to 108.00 MHz
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono .................................................................3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono ............................................................................... 71 dB
Stereo .............................................................................. 69 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono .................................................................................0.3%
Stereo ................................................................................0.5%
• Antenna Input................................................ 75  unbalanced
General
• Power Supply
[Australia model]............................................. AC 240 V, 50 Hz
[U.K. and Europe models] .............................. AC 230 V, 50 Hz
• Power Consumption........................................................ 280 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off .............. 0.1 W or less
HDMI Control On, Standby Through On (No Signals)
.......................................................................... 1.0 W (Typical)
Network Standby On......................................... 2.0 W (Typical)
• Dimensions (W x H x D)
......................435 x 161 x 315 mm (17-1/8" x 6-3/8" x 12-3/8")
* Including legs and protrusions
• Weight ............................................................. 8.1 kg (17.9 lbs)
* Specifications are subject to change without notice.
APPENDIX ➤ Specifications
107
En