Kitchener MG-204180 Instruction Manual

Kitchener MG-204180 Instruction Manual

Advertisement

Quick Links

#5 ELECTRIC MEAT GRINDER
MG-204180
INSTRUCTION MANUAL

INTRODUCTION

Thank you, and congratulations on purchasing the Non-corrosive electric meat grinder. Your grinder comes
complete with everything you need to grind meat and stuff sausage safely and easily. Please take a few minutes
to read through this instruction to learn more about this grinder. The grinder is made of the finest materials to
ensure extended use for all of your meat processing needs.
WARNING
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
Save these instructions in a safe place and on hand so that they can be read when required.

TECHNICAL DETAILS

Power Supply : AC120V, 60HZ
Power : 250 W

SAFETY PRECAUTIONS

GENERAL SAFETY RULES

WARNING: Read and understand all instructions.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover
all possible conditions or situations that could occur. It must be understood by the operator that
common sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
WARNING: Please operate according to Operation Method and remain the proper operation
procedures before using. Please assemble and operate carefully, taking care not to scratch skin. Please
don not to put hands around the paddles to avoid any possible hurt.
• Please read instruction manual.
• Keep all lose clothing, away from moving parts when grinder is in use.
• Keep fingers and hair away from moving parts when grinder is in use.
• DO NOT run grinder without meat in the grinder head. Severe damage to the head and auger may be a
result.
• Turn grinder off before unplugging from outlet
• Always unplug grinder when changing part (head, plates, blades stuffing tubes, etc) on the grinder.
• Remove all tendons, bone and shot from meat before grinding.
• Unplug when assembling or disassembling the unit.
• To keep supervision is necessary when any appliance is used near children.
U L
• When carrying the unit, be sure to hold the motor housing with both hands.
C
US
• Never remove or attach hopper plate, head or cap when motor is running.
R
• Do not disassemble the grinder or place anything (especially finger, spoon, fork, etc.) in the grinder
LISTED
during operation.
• Avoid contact with moving parts. Never feed meat by hand, always use meat stomper.
#5 ELECTRIC MEAT GRINDER
1 OF 5
One
year

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MG-204180 and is the answer not in the manual?

Questions and answers

Stephen Entwisle
June 30, 2025

What grade and amount of oil is required for the MK-12 grinder motor.

Summary of Contents for Kitchener MG-204180

  • Page 1 Please take a few minutes MG-204180 to read through this instruction to learn more about this grinder. The grinder is made of the finest materials to ensure extended use for all of your meat processing needs.
  • Page 2 #5 ELECTRIC MEAT GRINDER #5 ELECTRIC MEAT GRINDER BEFORE USE IF JAMMING OCCURS OR PERFORMANCE SLOWS • Disassemble the grinder head and wash each part thoroughly in warm soapy water; • Shut grinder off immediately. • Remove all packing grease and oil from the surfaces; •...
  • Page 3 #5 ELECTRIC MEAT GRINDER #5 ELECTRIC MEAT GRINDER WHAT IS KUBBE DIAGRAM AND PART LIST Kubbe is a traditional Middle Eastern appetizer comprised of a torpedo shaped shell made from meat and (usually lamb and blughur wheat). The center section is often stuffed with a spiced minced lamb filling and the ends are sealed to form a sausage.

Table of Contents