Installation - A QR034 Owner's Manual

Installation

1
Installing the duct set
WARNING: This unit has sharp edges .
Always wear safety gloves during installation .
- Attach the duct set (B) to the range hood (A) with eight
screws (AA) .
2
Installing the damper (if necessary)
WARNING: Sharp edges . Wear safety gloves .
CAUTION: Be very careful when installing the damper .
Applying too much force or not bending the damper enough
may damage or break the damper hinge ends .
The damper is pre-installed at the factory. Make sure that it has
not come loose during shipping and re-install it, if necessary.
- Insert one end of the damper (1) into the hinge slot (2) at
the top of the range hood (A) .
- Gently bend the damper (1) and insert its other end into the
hinge slot (2) .
A
2
A
11
Please contact 1-877-333-0098 for further assistance.
AA
B
1
CONGLOMKB .COM
1s