Rudder And Elevator Servos - E-FLITE Mini Funtana Assembly Manual

Rudder and Elevator Servos

Required Parts
Fuselage
Micro control horn w/backplate (2)
5 / " (145mm) pushrod wire
3
4
2mm x 4mm screw (2)
4 / " (115mm) pushrod wire
1
2
Micro control connector w/retainer (2)
Servos: JR 241 Sub-micro servo (JRPS241) (2)
9" (230mm) servo extension (2)
Required Tools and Adhesives
Phillips screwdriver (small)
30
Hobby knife
 1. Install the grommets and brass eyelets in the
elevator servo. Secure a 9" (230mm) servo
extension to the servo. Mount the elevator servo
using the hardware provided with the servo.
 2. Use a hobby knife to enlarge the center
hole in one of the remaining control horns.
Attach the 4 / " (115mm) pushrod wire to
1
2
the control horn.