▍
Hardware Setup
c
onnector
Chassis Intrusion Connector: JCASE1
This connector is provided to connect the chassis intrusion switch cable.
If the chassis is opened, the chassis intrusion mechanism will be acti-
vated. The system will record this status and show a warning message
on the screen. To clear the warning, you must enter the BIOS utility and
clear the record.
Serial ATA Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA interface port. Each connector
can connect to one Serial ATA device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
2-10