Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SmartPool CLIMBER NC52S
Summary of Contents for SmartPool CLIMBER NC52S
- Page 1 SMARTPOOL CLIMBER NC52S ROBOTIC POOL CLEANER OPERATION MANUAL ™ www.smartpool.com...
-
Page 2: Important Safety Instructions
Always remember to turn the power supply “OFF” and unplug it from the power outlet before removing the cleaner from the pool. If your robotic pool cleaner is not working as it should or has been dropped or damaged in any way, contact SmartPool LLC Technical Service before using at 1-732-... - Page 3 Congratulations on your purchase of the most technologically advanced automatic pool vacuum available today. Your SmartPool cleaner is easy to use and will make maintaining your pool affordable and effortless. Following these simple directions will insure that the cleaner will quickly and efficiently clean your pool today and for many years to come.
- Page 4 Secure the connection by rotating the black collar in a clockwise direction until it is HOLD HOLD hand tight. Insert the Extension Cord Union on the end of the Extension Cord and secure it by hand tightening the black collar on the end of the cable (Figure E3). NOTE: The Extension Cord Union has two distinctly different sockets to prevent an incorrect connection.
-
Page 5: Water Chemistry
INSTALLATION FIGURE. C1 • Walk the cleaner to the furthest point of the pool. • Add 6’/2m of cord to the pool for additional coverage. • Coil up the remaining cable and secure it so that excess cable will not be pulled into the pool (the Velcro strap originally attached to the cable can be used). - Page 6 • Hold the bottom lid as shown in Fig 4 and pull the tab marked “PULL TO REMOVE BAG” • Press the filter frame down all the way around the perimeter making sure that it is completely seated and behind all the tabs as shown in Fig 8. FIGURE 4 FIGURE 8 •...
- Page 7 SMARTPOOL CLIMBER PARTS LIST LOCATION ITEM NUMBER DESCRIPTION NC1037 Replacement Top Shell - Black NC1010B Drive Tube Mount - Black NC1003 Replacement Impeller Cover w/Screw NC1008 Handle w/Screw NC1004 Drive Brush - Set of 2 NC1014 Foam Ring NC3413 40' Cord - Swivel to Power Supply...
-
Page 8: Troubleshooting Guide
IF THERE IS D.E. IN THE POOL, IT COULD CLOG THE BAG. CLEAN THE BAG THOROUGHLY If your cleaner is still not performing properly after all of the troubleshooting has been performed please contact SmartPool LLC Technical Service at 1-732-730-9880 M-F, 9-5 EST. -
Page 9: Year Limited Warranty
Pattern ink can also rub off when they come into contact with objects in the pool. SmartPool LLC is not responsible for, nor does this limited warranty cover pattern removal, abrasion, and...
Need help?
Do you have a question about the CLIMBER NC52S and is the answer not in the manual?
Questions and answers