7
Poor fusing (images are blurred or peels off when the printed characters and im-
ages on the paper are touched by hand)
• Is paper of the specified grade being used?
• No
• Yes
Is the tension between the back-up roller (7.52kg) and the surface of back-up roller normal?
• No
• Yes
Is the connector of the fusing unit assy on the power supply board being connected properly?
• No
• Yes
Replace the fusing unit assy.
• Has the problem been solved?
• Yes
• No
Replace the main control board or power supply/sensor board.
41356901TH Rev.2
Use paper of the specified grade.
Replace the back-up roller or bias spring.
Connect the fusing unit connector properly.
End
108 /