3
Blank paper is output.
• Is the LED head being connected properly (check the HEAD1 and HEAD2 connectors on the main
control board and PC connector on the LED head)?
• No
• Yes
Is the contact of the image drum cartrige in proper contact with the ground contact properly (see
Figure 6-4
• No
• Yes
Replace the LED head.
• Has the problem been solved?
• Yes
• No
Replace the main control board or power supply/sensor board.
41356901TH Rev.2
Connect the LED head properly or replace the head cable(s).
)?
C
Adjust the ground contact (Drum) of the contact assembly.
End
104 /