Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSC 2,8 Professional Original Instructions Manual

OBJ_BUCH-598-001.book Page 13 Wednesday, November 14, 2007 10:16 AM

Technical Data

Sheet Metal Shears
Article number
Rated power input
Output power
Stroke rate at no load n
0
Stroke speed under
load
Max. steel sheet cutting
capacity*
Weight according to
EPTA-Procedure
01/2003
Protection class
2
* to 400 N/mm with reference to steel sheet
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted sound pressure level of
the product is 80 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a = 22 m/s
h
2
K < 2 m/s .
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
Bosch Power Tools
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total working
GSC 2,8
period.
Professional
An estimation of the level of exposure to vibration
0 601 506 1..
should also take into account the times when the
tool is switched off or when it is running but not
W 500
actually doing the job. This may significantly
W 270
reduce the exposure level over the total working
period.
spm 2400
Identify additional safety measures to protect the
operator from the effects of vibration such as:
spm 1500
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
mm 2.8

Declaration of Conformity

We declare under our sole responsibility that the
kg 2.7
product described under "Technical Data" is in
conformity with the following standards or
/ II
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
31.10.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
2
, Uncertainty
Auxiliary Handle (see figure A)
Unscrew the screw 3 out of the auxiliary handle
2 until the auxiliary handle fits into the auxiliary-
handle mount 4.
Slide the auxiliary handle 2 into the auxiliary-han-
dle mount 4. Tighten the auxiliary handle by turn-
ing in clockwise direction.
Dr. Eckerhard Strötgen
Head of Product
Certification
Before any work on the machine itself, pull
the mains plug.
1 609 929 N55 | (14.11.07)
English | 13