Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch Professional GST Series Original Instructions Manual

Hide thumbs Also See for Professional GST Series:
Table of Contents

Advertisement

16 | English
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

GST 18 V-LI S
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts. The saw blade recommendations
are to be observed.
GST 18 V-LI B
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber

Technical Data

Cordless jigsaw
Article number
Rated voltage
No-load stroke rate n
0
Stroke
Max. cutting depth
– In wood
– In aluminium
1 609 92A 4TM | (04.04.2019)
while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre/bevel angles of up to
45°. Note the saw blade recommendations.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off button for on/off switch (GST 18 V‑LI B)
(2) On/off switch
A)
(3) Battery
A)
(4) Battery release button
(5) Hex key (GST 18 V‑LI B)
(6) Plastic guide plate
(7) Base plate
(8) Pendulum action adjusting lever
(9) Guide roller
A)
(10) Saw blade
(11) SDS lever for saw blade release
(12) Worklight
(13) Shock protection guard
(14) Handle (insulated gripping surface)
(15) Worklight button (GST 18 V‑LI S)
(16) Stroke rate preselection thumbwheel
(GST 18 V‑LI S)
(17) Button for battery charge indicator
A)
(18) Battery charge indicator
(19) Saw blade receptacle
A)
(20) Steel glide shoe
(21) Anti-splinter guard
A)
(22) Extraction outlet
A)
(23) Extraction hose
(24) Base plate screw (GST 18 V‑LI B)
(25) Mitre/bevel angle scale (GST 18 V‑LI B)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GST 18 V-LI S
3 601 EA5 1..
V=
−1
min
550–2700
mm
mm
mm
A)
GST 18 V-LI B
3 601 EA6 1..
18
18
0–2700
23
23
120
120
20
20
Bosch Power Tools

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional gst 18 v-li sGas professional 18 v-li

Table of Contents