Setting The Time - Samsung 450S Installation Manual

¦ Multi Code Remocon (Only for HD470S)
Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote.
This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be
displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code.
The initial ID code of each TV is "0".
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
– The ID code can be from 0 to 9.
– Press the RETURN
– The Set ID OSD will be displayed in a central position.
– The following words will be displayed. "The Remote control code is set to x. If you want to change the Remote
control code. Enter the digit you want to change." (x is the digit number) This OSD will be displayed until the exit
key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
– For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
– The following words will be displayed."Remote control code is changed to 1". The TV can then only be controlled
by a remote control with the same ID code as the TV.
– If the ID code between the remote control and the TV does not match, the following words will be displayed.
" TV ID x" (x is the TV's ID)
– To reset the ID code, press the
Remote control will be reset to "0". "Remote control code is set to 0." will be displayed.
– The way to set or reset the ID may differ depending on the remote control. See the table below.
¦ Setting the Time
O
→ System → Time → Clock → Clock Set
MENU
• The time is entered
– Press the remote control button to select Clock and set up the time.
• Setting the Interactive Mode Time
– If the Hotel System transmits the time information, the time is set
automatically.
– If the Hotel System does not transmit the time information, the time
cannot be displayed.
✎ If the time is set, the clock will be displayed on the front panel.
+ MUTE keys for longer than 7 seconds and the digit key you want to set.
EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV and
Time
Clock
Sleep Timer
Wake-up Timer
Clock
Clock Mode
• Clock Set
• Time Zone
Off
Manual
Auto
35
English