Samsung 450S Installation Manual page 22

No
Category
12 Logo/Message
13 Cloning
REACH
14
Solution
15 Security
22
English
Hotel TV Function
Item initial value
Welcome Message
Edit Welcome Message
Hospitality Logo
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Setting Auto Intialize
REACH 3.0
REACH Channel
Group ID
Ticker
REACH Update Time
REACH Update
Immediate
Room Number
REACH Server Version
Password Input
Password Setting
Password Reset
Security Mode
USB
HDMI
TTX Security
Displays a the Welcome Message for 5 seconds when the TV turns On.
OFF
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
on, the Logo is displayed, before the signal from the initial source, for the
OFF
amount of time set in "Logo Display Time".
Downloads the Hospitality logo. Hospitality logo file requirements:
• BMP or AVI files only.
...
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Hospitality Logo Display Time (3/5/7 seconds).
...
Clone the current TV options to a USB memory device.
-
Clone the saved TV options on a USB memory device to the TV.
-
When Setting Auto Initialize is set to On, and the power is turned off and on
or the Master Power is turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when the Setting Auto Initialize is
OFF
set to On, it will be ignored and the operation will be the same as that when
Setting Auto Initialize is set to Off.
• ON: Open the REACH 3.0.
OFF
• OFF:Closed the REACH 3.0.
Select SIRCH Update Channel.
...
Select the SIRCH Group ID.
...
• On: The TICKER contents is displayed.
OFF
• Off: The TICKER contents is not displayed.
Select the SIRCH update Time. In the SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/
...
PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
• On : Whenever the TV enters Standby mode, always performs the
SIRCH Update.
...
• Off : Only performs the SIRCH Update at the selected SIRCH Update
Time.
Edit the room number.
...
Display the version of the SIRCH Clone file currently updated on the TV.
0000
Input Password 00000000.
...
Set new Password.
...
Reset Password to 00000000.
...
Security Mode ON or OFF.
...
USB Disable or Enable.
...
HDMI Disable or Enable.
...
TTX function Enable or disable.
...
Description