Samsung 450S Installation Manual page 23

No
Category
16 System
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only avail-
able in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the
REACH server product for more information on operating it.
Hotel TV Function
Item initial value
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern
Sound Bar Out
Contact Samsung
Standby LED
TV reset
Enter the Self Diagnosis Menu.
• Picture Test: Use this to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
...
• Sound Test: Use the built-in melody sound to check for sound prob-
lems. If the problem occurs during the test, select Yes and follow the
directions on the screen.
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any problems in
...
the variable audio out feature or communication with the SI STB or SBB,
please check this items.
SW USB Update function.
...
Display the Service pattern.
OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
OFF
this functionality is disabled The main TV Speaker will be muted while the
Sound Bar option is ON and the Speaker is connected through HDMI.
Samsung Contact information.
...
• On: The Function IR is On when Standby.
ON
• Off: The Function IR is Off when Standby.
Factory reset
...
Description
English
23