Co Line Queuing - Toshiba Strata DK User Manual
Standard telephone digital business telephone systems
Hide thumbs
Also See for Strata DK:
- User manual (136 pages) ,
- System administration manual (60 pages) ,
- Acd agent manual (34 pages)
Table of Contents
Advertisement
Features
CO Line Queuing
...or, to reconnect to
the transferred line
before it is answered,
flash the hookswitch
again.
CO Line Queuing
If all outgoing CO lines are busy, the CO Line Queuing feature will ring your telephone
when one is available.
To set CO Line Queuing
1. If you hear busy tone
after dialing a CO line
access code, press
2. Hang up. (You can
make other calls
while waiting for a
line to become
available.)
3. Your telephone rings
at a fast rate when a
CO line becomes idle.
4. Answer within three
rings to prevent the
callback from being
cancelled.
5. Dial the desired
telephone number.
18
If the called party lifts the handset (or presses a [PDN]
button on digital and electronic telephones) just before you
flash the hookswitch again, you will enter a conference
call.
Busy tone stops, followed by dial tone (2 secs.), then busy
tone resumes.
.
You hear CO dial tone. (If you hear busy tone, it means the
line has already been seized or has received an incoming
call. Your request is not cancelled. You will be called again
the next time a line becomes idle.)
If the original call was made using LCR (dial
system automatically dials the number.
), the
Strata DK Standard Telephone 5/99
Advertisement
Table of Contents
