Vivitar 936 User Manual page 9

4. The display screen will show an SD card icon
successfully installed.
5. To remove the card, gently press on the edge of the card to release it and pull the card out.
IMPORTANT:

Please power the camcorder off before plugging in or taking out the memory card.

If the card is inserted or removed while the camcorder's power is on, it may damage the
card and/or any recorded data. Always confirm that the power is off before inserting the
card into the camcorder.

Make sure there is room on the Micro SD Memory Card for additional images. If the Micro
SD Memory Card is full, additional images will not be added to the memory card.
The camcorder will beep three times when the memory card is full and 00:00 will appear
on the LCD indicating there is no time available and no space remaining on the SD card for
further recording.
POWERING ON – OFF / USING THE CAMCORDER
To power on the camcorder:
1. Press and hold the
2. The LCD displays "ON" and a beep can be heard from the camcorder's buzzer.
To power off the camcorder:
1. Press and hold the
2. The LCD displays "OFF" and a beep can be heard from the camcorder's buzzer.
Power button for about 3 seconds.
Power button for about 3 seconds.
8
, indicating that the SD card has been