Extended Operation Of Intercom Unit: 61Xx; One-Button Intercom; Speed Dial - jotron Phonetech 6200 User Manual

6. EXTENDED OPERATION OF INTERCOM UNIT: 61xx

5.1 ONE-BUTTON INTERCOM:

This functionality is dependant of having configured the one-button intercom memories (M1, M2 or
M3) in the configuration (CONFIG).
Idle
S
Dial [M1], [M2] or [M3] (KEEP HOLDING FOR PTT MODE)
U

Extension dialled responds differently according to type:
Paging group: Normal page.
61xx extension: Enters speakerphone mode.
POTS extension: Rings normally.

......Conversation
Press ACT key / release [M] to terminate.
U

5.2 SPEED DIAL:

Programming a two-button speed dial memory location:
Idle
S
Dial [P]
U

ACT and PTT led on
Dial the sequence of the operation you want to program (note)
U
Dial [P]
U

ACT led on and PTT led OFF
Dial location key [0] – [9]
U

ACT led OFF
Erasing a two-button speed dial memory location:
Idle
S
Dial [P]
U

ACT and PTT led ON
Dial [P]
U

ACT led on and PTT led OFF
Dial location key [0] – [9] to erase
U

ACT led OFF
Using a two-button speed dial memory location
Idle
S
Unhook the handset / ACT key
U

Dial tone

ACT led on
Dial [P]
U
Dial location key [0] – [9]
U

System responds to the programmed sequence, see the description of the operation in question
Jotron AS| Phontech 6200: User handbook  EXTENDED OPERATION OF
INTERCOM UNIT: 61xx
P/N: 87477 (v.B)
Page 11