Intrusion; Speed Dial; Conference: (Config) - jotron Phonetech 6200 User Manual

2.6 INTRUSION:

This function must be enabled as a part of "Service Classes" (CONFIG). It will override busy
subscribers and subscribers with PRIVACY enabled.

2.7 SPEED DIAL:

Speed dial is locally programmable per IU, and uses the buttons 0-9 as memory locations. This
programming is stored in the respective extension in the system and will not have to be
reprogrammed to any replacement IU.
POTS speed dial button is a local facility (not system controlled), dependant of the specific telephone
instrument.
Snom units can access the full extension list through their directory function. (Limited to 100
extensions)
2.8 CONFERENCE:
The conference function uses "MeetMe" rooms. When enabled, a globally configured extension is
the entry point to the conference rooms, where the user is asked to select a specific conference
room. All parties must go through this entry point and select the same room.
Jotron AS| Phontech 6200: User handbook  CONFIGURATION
DEPENDANT FUNCTIONALITY:
(CONFIG)
P/N: 87477 (v.B)
Page 4