Wake Up Call; Who Am I / Identification - jotron Phonetech 6200 User Manual

Idle
S
Unhook the handset
U

Dial tone
Dial [*57]
U

Tone off, system enters programming mode for WAKE UP
Dial 0-9 as: HHMM
U

Confirmation tone
Replace the handset
U
If the input data is faulty the system replaces the confirmation tone with the barring tone.
To clear wakeup call:
Idle
S
Unhook the handset
U

Dial tone
Dial [#57]
U

Confirmation tone
Replace the handset
U

4.11 WAKE UP CALL:

The wake up call is automatically executed by the system at the requested time. The
telephone unit will ring normally until the call is answered (Off hook), or for 3 minutes
before automatically being turned off.

Wake up Call
Unhook the handset
U

Wake Up Tone
Replace the handset
U

4.12 WHO AM I / IDENTIFICATION:

The WHO AM I / IDENTIFICATION function is a way to read the extension number from each
line in the system. It is very useful during installation to establish the true extension number
and correspondence between the physical connection and the extension number.
For more information see chapter 4.
Idle
S
Unhook the handset
U

Dial tone
Dial [*080]
U

Tone off, system outputs WHO AM I / IDENTIFICATION information
Replace the handset
U
Jotron AS| Phontech 6200: User handbook  BASIC OPERATION:
P/N: 87477 (v.B)
Page 9