Setup Menu - Cambridge Audio azur 752BD User Manual

Setup Menu

To access the player's setup menu simply press the Setup Menu button
on the remote control. Since some Setup Menu options can become
inaccessible when the player is playing a disc, it is recommended that
you operate the Setup Menu when playback is fully stopped or when
there is no disc in the player.
The Setup Menu presents many setup and configuration options. For
most users, the default configuration will be sufficient and will often not
require changes to the settings.
However if you wish to configure the player to perfectly match your home
theatre settings and viewing preferences, please refer to the following
sections for details about each configuration option.
Using the Setup Menu System
When performing menu adjustments, we will use the following
terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection
Setup Menu
Playback Setup SACD Priority
Video Setup DVD-Audio Mode
Audio Format Setup Auto Play Mode
Auto Resume
Audio Processing
Device Setup Parental Control
Network Setup Language
Exit
Playback starts when the PLAY button is pressed
Setup Menu Section is the uppermost Setup Menu level. With the 752BD
there are six Setup Menu sections listed in the left column of the Setup
Menu screen. They are: Playback Setup, Video Setup, Audio Format
Setup, Audio Processing, Device Setup, and Network Setup.
Menu Item is the parameter to be adjusted which appears in the centre
column of the Setup Menu. Once you enter a Setup Menu Section, the list
of Menu Items and their current value are displayed in a box.
Selection is the actual numeric or descriptive element that represents
the change being made to the selected parameter. It is the item located
to the right of its corresponding Menu Item.
A scroll icon appears at the top or bottom of the menu when there
are more Menu Items or Selections than what can fit in a screen. You
may use the  and  buttons to scroll the display in order to access
additional items.
22
Note: It is possible that some setup items are greyed-out and inaccessible.
This can be caused by a disc still being played back or interlocking with
mutually exclusive setup items. Please stop playback or eject the disc
before trying to change these setup items. If you still cannot access the
setup item, please check for configuration conflicts and consistency. For
example, if
conversion
Setup
Setting
menu items
1. Press the Setup Menu button on the remote control, and the TV screen
displays the following:
2. Press the / buttons to select the section. There are six sections:
Playback Setup, Video Setup, Audio Format Setup, Audio Processing,
Device Setup, and Network Setup. Press the Enter button or the 
button to enter the selected section.
3. Press the / buttons to select the setup item to be changed, and
press the Enter or  button to change the setting. When the scroll
icon is shown at the top or bottom of the Setup Menu, it indicates that
there are more menu items that can be accessed by scrolling with the
/ buttons.
4. To select a value from the list of available settings, press the /
buttons and then press the Enter button to confirm. For example, to
select
On
"
Exit
5. To exit the Setup menu at any time, press the Setup Menu button on
the remote control or select Exit from the Setup menu sections.
The settings are permanently saved when the player is turned off using
either the front panel Standby/On button or the same button on the
remote control. If the AC power is interrupted before the player enters
standby status, the settings will not be saved.
Video Setup > 1080p24 Output
"
menu items Auto and
" " " "
1080p24 Output to On will enable the
" " " "
Auto and Source Direct
" " "
Setup Menu
Playback Setup SACD Priority
Video Setup DVD-Audio Mode
Audio Format Setup Auto Play Mode
Audio Processing Auto Resume
Device Setup Parental Control
Network Setup Language
Exit
Configure playback preferences
Setup Menu
Setup Menu
Playback Setup SACD Priority
Playback Setup SACD Priority
Video Setup DVD-Audio Mode
Video Setup DVD-Audio Mode
Audio Format Setup Auto Play Mode
Audio Format Setup Auto Play Mode
Audio Processing Auto Resume
Audio Processing Auto Resume
Device Setup Parental Control
Device Setup Parental Control
Network Setup Language
Network Setup Language
Exit
Exit
On for Auto Play Mode , use the / buttons to highlight the
" " " "
Configure playback preferences
selection and press the Enter button.
"
Set the auto play mode for CD and SACD
Setup Menu
Playback Setup SACD Priority
Video Setup DVD-Audio Mode
Audio Format Setup Auto Play Mode
Audio Processing Auto Resume
Device Setup Parental Control
Network Setup Language
Exit
Set the auto play mode for CD and SACD
is set to Off , the DVD 24p
" " " "
Source Direct will be grayed-out.
"
DVD 24p conversion
"
to be set.
"
Multi-Channel
DVD-Audio
On
On
Exit
Multi-Channel
Multi-Channel
DVD-Audio
DVD-Audio
On
On
On
On
Exit
Exit
Multi-Channel
DVD-Audio
On
On
Exit
"