Angle Selection; Zoom; Blu-Ray Disc Menu; Dvd Disc Menu - Cambridge Audio azur 752BD User Manual

The Subtitle Shift feature can be used to shift subtitles up or down so
they are displayed within the active video area.
To shift the display position of subtitles, follow these steps:
1. When playing a DVD, Blu-ray Disc or other video programs recorded
with subtitles, select the desired subtitle from the disc menu or by
using the remote.
2. Press and hold the Subtitle button on the remote control until the Shift
Subtitle Position prompt appears on the screen.
3. Wait until some subtitle text is visible on the screen, and then use
the / buttons to move the subtitle text to a desired new position.
4. Press the Enter button to set the subtitle display position. Once the
Subtitle Shift position is set, it is saved by the player in the Video Setup
> Display Options > Subtitle Shift setup menu option. The setting will
be applied to subtitles of all future DVD and Blu-ray Discs. You can
also change the setup menu item directly. Refer to the Video Setup
for more information.

Angle selection

1. When playing a DVD or Blu-ray Disc, an angle mark will be displayed
on the screen when the player detects scenes recorded with multiple
possible angles.
The angle mark is also shown on the front panel display.
2. Press and hold the Angle button on the remote control to select the
desired playing angle.
3. To resume normal playback, hold the Angle button until the default
angle is displayed.
Note: This function is available only when the discs are recorded with
multiple angles. The Angle mark display shows when an alternative angle
is available. The Angle mark display on the screen can be turned off
using the Setup Menu of the player.

Zoom

To change the zoom level, press the Zoom button on the remote control.
repeatedly pressing the Zoom button will switch the zoom level in the
following sequence: 2x, 3x, 4x, 1/2, 1/3, 1/4 then back to normal.
The zoom level is reset to 1:1 when the disc is ejected, or when the player
is turned off.
Note: The Zoom feature may not be available when certain DVD or Blu-
ray Discs are played because the disc author chooses to disable Zoom.

Blu-ray disc menu

1. Blu-ray discs usually contain a top menu and a pop-up menu. The top
menu normally appears at the beginning of the playback, after the
previews and copyright messages and allows access to different film
presentations or extras etc. The Pop-up Menu can be accessed during
playback without interruption and usually allows access to different
chapters with in a film.
2. During playback, press the Pop-up Menu button to access the pop-up
menu. Press the Top Menu button to access the top menu.
3. Navigate the menu using the () Navigation buttons, and then
press the Enter button to make the selection.
4. Some menus make use of the colour buttons. You can select menu
functions by pressing the corresponding Colour button on the remote
control.

DVD disc menu

1. Some DVD discs also contain title menu or chapter menu functions.
2. During playback, press the Top Menu button to return to the disc title
menu. Press the Pop-Up Menu button to display the chapter menu.
Depending on the disc, one or both menus may not exist.
3. Navigate the menu using the () Navigation buttons, and then
press the Enter button to make the selection.
4. Press the Return button to return to the previous menu. The return
location varies by disc.
azur

Memory and automatic resume

The player automatically remembers the current position for a disc when
playback is interrupted. Operations such as Open/Eject or turning Power
off will cause the player to save the current playing position for that disc.
The position is memorised even after turning off the unit or changing
the disc.
When the next time the same disc is played back, the player will recognize
the saved playing position. Playback will automatically resume from this
saved position. However if you wish to cancel the automatic resume and
start playback from the beginning, you may press the  button when
prompted.
The player can remember playback position for up to five discs. When the
sixth disc is memorised, the oldest one is replaced.
Note: Some Blu-ray discs do not support resuming and will always play
from the beginning.

HDMI / MHL INPUT selection

1. Press the Digital Inputs button on the
remote to bring up the "Input" source
menu.
2. Use the / buttons to choose the re-
quired digital input from the list.
3. You can always select the BLU-RAY Player
to return to home menu for disc or file
playback.
Note: The front HDMI IN port is MHL (Mobile
High-definition Link) compatible. A dedi-
cated MHL cable or adapter is required (not
included) and some configuration may be
required on the mobile device.
Audio Return Channel (ARC)
Input
Selection
1. BLU-RAY PLAYER
1. The ARC sources are also available in
2. HDMI/MHL IN-FRONT
the Digital Inputs menu. Press the Digital
3. HDMI IN-BACK
Inputs button on the remote to bring up
the Input Source menu.
4. ARC: HDMI OUT 1
2. Use the / buttons to choose the
5. ARC: HDMI OUT 2
required ARC channel.
6. OPTICAL IN
3. You can always select Blu-ray Player to
return to the 752BD home menu for disc
7. COAXIAL IN
or file Playback.
Note:
• Audio Return Channel (ARC) is a feature introduced in HDMI V1.4,
which allows you to send digital audio signals from the television back
to the player or receiver. Instead of listening through TV speakers, ARC
allows the sound to be processed and produced by the home theater
audio system.
• A HDMI 1.4 cable is required and you need to make sure the HDMI
input port on the TV is ARC capable . Usually, ARC also has to be
enabled in the TV's settings.
The volume control buttons on the remote handset only affect the analog
audio outputs. Volume control does not apply to the digital audio/video
outputs (HDMI, Co-axial and Optical). The remote can alternatively be
made to control the volume (plus source change, mute, on/off and zone
2 where available) of most Cambridge Audio azur range AV Receivers and
amplifiers See the previous section on the remote control for full details.

Playback by Chapter or Track Number

During the playback of a disc, you can use the numerical buttons on the
remote control to directly jump to a specified chapter or track number.
For example:
• To select the seventh track, press the [7] button.
• To select the 16th track, press [1] followed by [6] in quick succession.
Note: Certain DVD-Audio and Blu-ray Discs may not allow for direct
chapter selection.
752BD
Input
1. BLU-RAY PLAYER
2. HDMI/MHL IN-FRONT
3. HDMI IN-BACK
4. ARC: HDMI OUT 1
5. ARC: HDMI OUT 2
6. OPTICAL IN
7. COAXIAL IN
Input
1. BLU-RAY PLAYER
2. HDMI/MHL IN-FRONT
3. HDMI IN-BACK
4. ARC: HDMI OUT 1
5. ARC: HDMI OUT 2
6. OPTICAL IN
7. COAXIAL IN
17