Cambridge Audio azur 752BD User Manual page 14

HDMI connection cont.
Connecting separately to a display and audio system
using dual HDMI
If your AV Receiver cannot pass 3D TV HDMI signals it is possible to
configure the 752BD to output Video (inc 3D TV) via HDMI 1 directly to a
3D compatible display and Audio via HDMI 2 directly to the AV Receiver.
Connection to a TV/Monitor.
a
Connection to an AV Receiver.
b
a
TV/Monitor
with HDMI
1.4 input.
MHL/HDMI inputs.
The 752BD has two HDMI inputs. One on the front panel which also
features MHL and one on the rear panel.
Both can accept up to 1080p video and digital audio.
The front panel HDMI is combined with an MHL input, either type of
connection can be used with portable devices such as digital camcorders.
For HDMI devices the 752BD can received audio and video in the normal
way, for MHL devices the 752BD receives audio and video and also
powers or charges the device.
Standby / On
Set-top box with HDMI output
14
HDMI cable
HDMI cable
In
Set the Dual HDMI Output option in the video setup
menu to 'Split AV', see later section.
b
The 752BD is pre-configured from the factory for the best settings for
most modern TVs and AV Receivers.
However to ensure you have the basic settings right please read the
following sections on setting the best output resolution, display aspect
ratio and audio settings. Many more advanced options are also covered
later in the manual.
MHL cable
AV Receiver with
HDMI 1.3 input.
azur
752BD
Blu-ray Disc Player
MHL/HDMI In MHL/HDMI In