Arrow 3M Network Card Brochure page 32

Sensors for Defence, Aerospace
and Automotive Applications
Devices from Analog Devices, Infineon and Vishay
This review of sensors featured recently in Arrow Innovation
highlights two pressure sensors from Infineon, Vishay's single
and dual channel SMT optical sensors and accelerometer and
yaw rate sensor technologies from Analog Devices.
Analog Devices' iSensor™ products are highly integrated, calibrated,
motion sensing products that are easy to use and cost-effectively
improve product precision, response time, reliability, safety and
security. The ADIS16350/ADIS16355 iSensor is a complete digital
inertial sensing system that combines a triple-axis gyroscope and
accelerometer. The sensor combines Analog Devices' iMEMS ®
and mixed signal processing technology in a highly integrated,
calibrated solution.
Features
Complete digital inertial sensing system
Tri-axis gyroscope with digital range scaling
Tri-axis accelerometer
Factory calibrated sensitivity, bias and alignment
SPI compatible serial interface
2000G shock survivability
32
TECHNOLOGY
ROUNDUP
- Settings: ±75°/s, ±150°/s, ±300°/s
- 14-bit resolution
- ±10G measurement range
- 14-bit resolution
- 350Hz bandwidth
For further information, including Datasheets on the featured devices, please
ENQUIRY 1435
complete the reply slip or visit
Analog Devices' ADIS16100 is a yaw detector particularly suitable
for defence and aerospace applications. Surface-micromachining
technology makes a functionally complete yaw rate sensor that
communicates via an integrated SPI. The device produces a digital
output proportional to the angular rate about a defined axis. Using
a single external resistor can increase the measurement range and
a capacitor can reduce the bandwidth.
Features
Complete angular rate gyroscope
Z-axis (yaw rate) response
SPI digital output interface
High vibration rejection over wide frequency range
2000G powered shock survivability
Externally controlled self test
Internal temperature sensor output
Dual auxiliary 12-bit ADC inputs
Absolute rate output for precision applications
5V single supply operation
8.2mm × 8.2mm × 5.2mm package
Infineon's pressure sensors serve tyre pressure and engine
management needs, combining high precision and low cost
with reliability. The SP 30 is a third generation, single package,
tyre pressure sensor containing a microcontroller, LF receiver and
accelerometer. Its flexibility and high level of integration reduce
system cost while permitting a high degree of customisation.
Features
Integrated tyre pressure monitoring system
Pressure sensor: 100kPa to 450/700/800/900/1400kPa
Temperature sensor: -40°C to +125°C
Supply voltage sensor: 1.8V to 3.6V
Acceleration sensor: -12g to 115g
http://www.arrowne.com/innov/in216/f_1435.shtml