Communication Solutions - Arrow 3M Network Card Brochure

LIN and CAN Transceivers for Automotive
Applications
Broad range of data speeds and functionality
ON Semiconductor offers a wide variety of LIN and CAN bus
transceivers intended for use in automotive applications.
The range includes high and low speed options, devices
with extremely low power consumption and fault tolerant
components with failure detection logic.
The AMIS-42665 and AMIS-30660 are high speed (1Mbaud),
differential CAN transceivers. Designed for use in both 12V
and 24V systems, they feature excellent common-mode voltage
range at the receiver inputs, improving their ElectroMagnetic
Susceptibility (EMS) performance. Due to excellent matching on the
output side, they also offer outstanding ElectroMagnetic Emissions
(EME) performance, eliminating the need for an external common-
mode choke.
The AMIS-42665 exhibits ideal passive behaviour when the supply
voltage is removed. It has an extremely low (60mA) standby current
and includes 'wake-up over bus' functionality, allowing its use in
power-sensitive applications.
The AMIS-4168x devices are fault tolerant, low speed CAN
transceivers designed for communication at up to 125kbaud,
primarily in cars. They provide differential transmit capability, but
will switch to act as a single-wire transmitter and/or receiver in the
event of a fault condition under control of failure detection logic.
The AMIS-41682 has a 5V interface to the CAN controller, while
the AMIS-41683 has a true 3.3V interface. Short circuit, thermal
and transient protection are included.
The NCV7356 is a CAN 2.0 physical layer device intended for use in
applications where high data rate is not critical. It allows designers
to make cost savings in both the physical media components and
in the microprocessor and/or logic devices that use the network.
In addition to its low-speed operating mode, the device includes
a high-speed mode that is designed for assembly line and service
data-transfer use and requires the bus to be terminated by an off-
board service node.
16
COMMUNICATION
SOLUTIONS
For further information, including AMIS-30600, AMIS-30660, AMIS-30663,
ENQUIRY 1420
AMIS-4168X DS REV5, AMIS-42665 and NCV7356 Datasheets, please complete
the reply slip or visit
The AMIS-30600 single-wire LIN transceiver is standards compliant
and designed for a transmission rate of up to 20kbaud. For
enhanced EMC performance, it features an integrated receiver
filter with hysteresis and transmitter slope control. It is designed for
power-sensitive applications with an operating voltage of 4.75V
to 5.25V.
Features
Wide range of single-wire and differential LIN
and CAN transceivers
Fully compatible with CAN/LIN standards
Several operating voltage range options
Low power modes
Excellent EMS/EMC performance
Range of maximum data rates: 40kbaud to 1Mbaud
Wake-up over bus options
Bus dominant timeout option
Various protection options
- Undervoltage lockout
- Short circuit protection
AEC qualified and PPAP capable
Applications
In-vehicle communication systems
ISO9141 diagnostic systems
Sensors and controls
Electronic locking
Window lifters
Mirror control
Engine control
Gearbox
Air conditioning
Airbags
Seats
Body control module
Infotainment
ON Semiconductor AMIS-30600, AMIS-30660,
AMIS-30663, AMIS-4168X DS REV5, AMIS-
42665 and NCV7356 Datasheets available!
http://www.arrowne.com/innov/in216/f_1420.shtml