Arrow 3M Network Card Brochure page 29

Low Power Processors Feature USB OTG and Ethernet
Wide range of devices optimised for power and processing requirements
Blackfin ADSP-BF52x and ADSP-BF54x processors from
Analog Devices are designed for use in performance-
demanding portable products that require a wide range of
connectivity options.
The ADSP-BF52x and ADSP-BF54x Blackfin processor families
are optimised for performance-demanding portable applications
including Portable Media Players (PMPs), Voice over IP (VoIP)
phones, IP cameras and mobile TV devices. With a core power as
low as 0.16mW/MHz at 250MHz, the newest Blackfin processors
give system designers room to innovate without increasing power
consumption or system cost.
The ADSP-BF52x series offers a wide range of high performance,
low power options. These include the ADSP-BF527, ADSP-BF525
and ADSP-BF523, which operate at up to 600MHz, and an
ultra-low-power series, ADSP-BF522, ADSP-BF524, and ADSP-
BF526, operating at up to 400MHz with excellent standby power
dissipation.
The ADSP-BF54x further enhances the Blackfin portfolio and offers
additional options for performance and power. The ADSP-BF542
and BF544 provide core performance ranging from 400MHZ to
600MHz, the ADSP-BF547 and BF548 provide up to 533MHz
performance and the BF549 provides a full suite of connectivity
options for automotive applications requiring operation at up to
533MHz.
Analog Devices supports these products with full EZ-KIT Lite
Evaluation Kits. The ADSP-BF527 Kit features the processor itself,
SRAM and Flash, an audio codec, USB debug agent, LCD, touch
screen/keyboard controller and HS USB OTG functionality. An
Ethernet PHY is also available. The ADSP-BF548 Kit includes the
processor, SDRAM and Flash, audio codec, hard drive, LCD with
touch screen/keyboard controller and Ethernet PHY.
For further information, including the ADSP-BF52x Series and
ADSP-BF54x Series Datasheets, please complete the reply slip or visit
http://www.arrowne.com/innov/in215/f_1404.shtml
Features: ADSP-BF52X
Up to 600MHz Blackfin processor
Two 16-bit MACs, two 40-bit ALUs, four 8-bit video ALUs
and a 40-bit shifter
RISC-like register and instruction model
Advanced debug, trace and performance monitoring
Core operation from 1.0V to 1.2V with optional on-chip
voltage regulation
1.8V, 2.5V or 3.3V I/O
CSP BGA package
Features: ADSP-BF54X
Up to 600MHz (1200 MMACS) Blackfin processor
HS USB OTG
Host DMA
UARTs
SPORTs
SPI
TWI
CAN
SD/SDIO and ATAPI-6 controllers
Synchronous and asynchronous memory interfaces
Hardware-enabled security
18/24-bit LCD controller
Multimedia accelerators
CSP BGA package
Applications
Portable and handheld devices
Mobile TV
Multimedia co-processor
Biometric systems
Consumer audio
Industrial control
Instrumentation
Imaging
Voice communication
Automotive multimedia device interconnect
PC peripherals
POS/bar code scanners
PROCESSOR
SOLUTIONS
ENQUIRY 1404
Analog
Devices
ADSP-
BF52x
Series and
ADSP-
BF54x
Series
Datasheets
available!
29