Canon iPF670 Series Basic Manual page 55

iPF670 Series
k Cutter Rail
The Cutter Unit passes over this rail to cut paper.
l Output Tray
All printed documents are ejected from this slot.
m Ejection Guide
Supports output paper.
n Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as needed.
(See "Top Cover (Inside).")
o Width Guide
When loading the sheets , move the guide to match the paper size.
p Stand (Optional)
A stand that holds the printer. Equipped with casters to facilitate moving it. (See "Stand.")
•
The Stand that can be used with this printer is Printer Stand ST-27 and Printer Stand ST-26.
•
The Stand is normally offered as an optional accessory, but either one or the other of the Stand may be included
Note
as a standard accessory in some sales regions and periods.
•
The output stacker of the Printer Stand ST-26 has a regular position and an Extended position A.
For details on the extended position, see "Using the Output Stacker."
•
The Stand is described in the illustration of Printer Stand ST-27. Note that the illustrations may look different from
the appearance of your printer in some cases.
Basic Guide
P.57
➔
User's Guide
➔
User's Guide
➔
Front
55