Reinstalling The Printer - Canon iPF670 Series Basic Manual

iPF670 Series
7
When the processing is complete, "Completed! Turn Power
Off!!" is displayed. Press the Power button to turn the power
off.
Pack the printer
1
Disconnect the power cord and interface cable.
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
Important
follow this procedure again.
2
Tape down printer covers to secure them, in the re-
verse order of tape removal during installation.
3
Remove the Stand by reversing the installation procedure, when it was attached to the printer.
4
Disassemble and repackage the Stand by following the installation procedure in reverse.
5
Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a
shipping box.

Reinstalling the Printer

Reinstalling the Printer
The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.
Basic Guide
Reinstalling the Printer
63