Alcatel Onetouch POP Icon A564R Quick Start Manual page 4

1�2 Getting started
1�2�1 Set-up
Installing or removing the back cover
Inserting or removing the battery
Inserting or removing the MicroSD card
To install a microSD card, Place the microSD card into the slot with
the gold contacts facing downward and gently insert the SD card until
it locks into the slot. Insert battery into slot until locked in position,
then close the battery cover.
To remove it, remove the battery cover and battery, slide the
microSD card from slot gently.
Before inserting/removing the MicroSD card, you should
ensure the phone is off, to protect it from data corruption
or damage. Regularly removing or inserting the MicroSD
card may cause the smartphone to restart.
6
Charging the battery
Connect the battery charger to your smartphone and wall outlet.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to
show the charging status bar. It may take up to 20 minutes
to display the battery charger indicator on the screen. To
reduce power consumption and energy waste, once the
battery is fully charged, disconnect your charger from the
plug; switch off Wi-Fi, Bluetooth or background-running
applications when not in use; reduce the backlight time, etc.
1�2�2 Power on your smartphone
Hold down the Power key until the phone powers on. It will take a
few seconds before the screen lights up.
Setting up your smartphone for the first time
The first time you power on the smartphone, you should set the
following options: language, date & time, Google account, etc.
1�2�3 Power off your smartphone
Hold down the Power key until the Phone options appear, select
Power off.
7