Automatic Switching - Fostex IS205 Owner's Manual

Settings
„ Enabling and disabling outputs
„
1 Turn off the power.
2 Turn on the power while holding down the [OUTPUT] switches (from 1 to 5) you want
to enable. The enabled switches light in green. The unit memorizes which switches are
enabled/disabled and will keep these settings the next time the device is turned on.
„ Configuring DIP switch settings
„
DIP switch
(default settings)

Automatic switching

Automatic switching enables the unit to switch automatically between outputs 1 to 4. You can turn the
function on and off using DIP switches 1 to 3. You can set the switching interval between 5 seconds and
35 seconds in 5 second increments. The following table shows how to configure the DIP switches for
each switching interval length.
1 (5 seconds)
OFF
ON
OFF
ON
OFF
ON
OFF
ON
• Automatic switching cannot be used with OUTPUT5.
• When you press an [OUTPUT] switch from 1 to 4 while automatic switching is on, the function turns off
for 30 seconds.
Switch position guide
2 (10 seconds) 3 (20 seconds)
OFF
OFF
ON
ON
OFF
OFF
ON
ON
Set interval length
(seconds)
OFF The function is turned off
OFF
OFF
OFF
ON
ON
ON
ON
5
10
15
20
25
30
35
5