Lan Setup - D-Link DSL-2520U User Manual

Section 3 - Configuration

LAN SETUP

You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP
service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the
Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses
available in the DHCP IP address pool will change automatically if you change the IP address of the Router.
To access the LAN Setup setting window, click on the LAN Setup button in the SETUP directory.
ROUTER SETTINGS
To change the Router IP Address or Subnet Mask, type in the desired
values.
DHCP SERVER SETTINGS (OPTIONAL)
The Enable DHCP Server is selected by default for the Router's Ethernet
LAN interface.
Set the DHCP IP Address Range and the default is from 192.168.1.2 to
192.168.1.33. The IP address pool can be up to 253 IP addresses.
Set the value hours on the DHCP Lease Time and the default is 72 hours.
If you don't want DSL-2520U to be the DHCP server, you can uncheck
Enable DHCP Server to disable current DHCP server.
D-Link DSL-2520U User Manual 25