Frame And Accessories Structure; Disassembly And Maintenance Of Frame And Accessories; Section 5 Frame And Accessories - ZONGSHEN ZS250GY-3(EFI) Maintenance Manual

Frame is the supporting framework of motorcycle.It is the main supporting part of motorcycle.Because
motorcycle should bear mighty shake during running,its component and structure must have high
intensity and the frame is required to be light.In this way,it is good for motorcycle to have a high-speed
running.
1 Structure and Working Principle of Frame and Accessaries

2 Disassembly and Maintenance of Frame and Accessories

[ 1] Ch e ck re a rv i ew m i rr o r f or lo o se n es s
and damage. Fasten or repair it if loose or
damaged.
CAUTION
Keep the rearview mirror clean and dustless.
Adjust it to its best angle before riding.
[2 ]Ch eck wh eth er side st and is be nd or
d is to rt e d. Re pa i r or r e pl ac e i t if be nd o r
d i s t o r t e d .
24
Section 5 Frame and Accessaries
ing and crooked girder.It has high intensity,good
firmness and good suitability.It mainly consists of
head pipe,main frame,tail pipe,rear supporting pipe
and low bending pipe.It is made through the meth-
ods of jointing,riveting and so on.
system,operation system,seat,fuel tank,brake sys-
tem and so on.Meanwhile,it also offers the install-
ing point for other accessories.It makes motorcycle
as an integrated part.
The frame of this motorcycle adopts pipe joint-
Frame is used to support engine,transmission
Check
rearview
mirror
Side stand