Front Panel Controls - CAMBRIDGE CXR120 Reference

Front panel controls

1
1
1. Standby/On
Switches the unit between Standby mode (indicated by a dim power LED) and
On (indicated by a bright power LED). Standby is an eco-friendly <0.5W low
power mode. The unit may be left in Standby mode when not in use.
2. Phones
Allows for the connection of stereo headphones with a 6.35mm / ¼" Jack
plug. Headphones with an impedance of between 32 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the speakers and
select a Dolby Headphones output to be created for headphone use.
3. Tuning +/-
Used to tune FM/AM frequencies and skip presets for the built-in Tuner.
4. Direct
Disables any audio processing on the current source.
5. Zone (CXR200 only)
If illuminated, indicates Zone 2 is enabled (on). This button can be used to
enable/disable the Zone 2 function, press this button to display Zone 2 on
the Display followed by the Standby/On button. Pressing the Standby/On
will toggle between On and Off. See later section of this manual for more
information.
6. Display
Displays the status of the unit.
7. Source +/-
Press to scroll through the available sources. Also used for character entry.
+/- button to move between character entry.
4
3
2
4
5
3
2
7
6 8
9
10
7
6 8
9
10
8. Infrared sensor
Receives IR commands from the supplied remote control. A clear,
unobstructed line of sight between the remote control and the sensor is
required.
9. Menu
Press to enter the Setup menu.
10. Back
In the Setup menu, press to return to the previous menu item.
11. USB / MP3 / HDMI/MHL Inputs
USB – Use to connect a USB storage device or another portable device
containing music files. Music playback via the Cambridge Connect app. 1A
maximum current consumption.
MP3 – This source input allows you to connect a portable audio device such
as an MP3 player directly into the front of the unit using the 3.5mm stereo-
jack (labelled ' '). Select the MP3 input source through the main menu 'Audio
Inputs' or direct MP3 button on the remote to listen to your portable audio
device.
HDMI – MHL (Mobile High-definition Link) compatible. This input is used
to connect to a mobile source device such as a mobile phone or a digital
camcorder.
The combined socket allows either a standard HDMI 1.4 compatible source to
be connected to the CXR or alternatively an MHL device (such as some new
phones) in which case the device can also be charged whilst sending digital
audio/video to the CXR.
Note: To utilise the MHL capability, the source device needs to be MHL
enabled and an MHL cable/adaptor is required.
12. Volume
Use to increase/decrease the level of the sound from the outputs of the CXR.
Also used as Enter button by pushing to select source input and menu items.
Also used for character entry. Rotate to browse through the characters.
CXR120/200
CXR120
12
HDMI 7 / MHL
11
CX R200
12
HDMI 8/ MHL
11
5