Rectifying Malfunctions; Colour Tv - AEG CTV 4807 Instruction Manual

Hide thumbs Also See for CTV 4807:
Table of Contents

Advertisement

Available languages

Available languages

Viewing angle
Scenes filmed from various viewing angles are stored on certain
DVDs. On playback, these scenes are indicated by the camera
symbol.
To change the viewing angle, press the "ANGLE" button until
the desired viewing angle is displayed.
Slow motion
A DVD or VCD can be played forwards or backwards in slow
motion. The following speed levels can be selected in each case:
1/2, 1/4, 1/8 and 1/16.
To play a scene in slow motion, repeatedly press the "SF"
button until the desired speed level is set.
To continue playback at normal speed, press the " / "
button.
Frame-by-frame playback
To play a scene on a DVD back frame-by-frame, repeatedly
press the "SYS./
" button.
Each time the button is pressed, the next frame of the film is
displayed.
To continue playback at normal speed, press the " / "
button.

Rectifying malfunctions

Colour TV

Symptom
Possible cause and remedy
The display
The power cable is not connected.
does not light
Connect the power cable to the mains socket.
up.
The mains switch is not switched on.
Switch the mains switch on.
No sound or
The TV set is in standby mode.
picture, the LED
Press the "
on the TV set
the channel is shown on the TV screen.
lights up.
No sound or
No signal or a weak signal only.
picture.
Check the cable connection to the TV set.
Align the antenna.
The TV set does
The system is not connected correctly.
not show a
Check the SCART or HF cable's connection.
picture.
The TV set is not in the correct mode
(TV/DVD/AV).
Switch the TV set to the desired mode.
Poor picture,
The antenna is not aligned correctly.
locking error
Align the antenna.
The remote
The batteries are spent.
control does not
Replace the batteries with new ones.
function.
The remote control is not being pointed properly.
Point the remote control at the front of the TV set
and make sure that nothing is positioned between
the remote control and the TV set.
No sound
The wrong television standard is set.
Change the television standard (see page 30).
Rectifying malfunctions
" button. The TV set switches on and
35

Advertisement

Table of Contents
loading

Table of Contents