Nokia X2-00 Service Manual page 21

8) Place the KEYPAD below the A-COVER as shown.
10) Press down the KEYPAD to attach the clips.
12) Tighten the two TORX + size 6 screws to the
torque of 21 Ncm in the order shown.
21
9) Make sure that the KEYPAD covers the bottom
end of the A-COVER window shown by the arrows.
11) The KEYPAD is now assembled.
Confidential • Copyright © 2010 NOKIA • All rights reserved
Nokia X2-00
RM-618
Service Manual Level 1&2
Version 2.0