Foxconn P4M800P7MA series User Manual page 55

PnP/PCI Configurations
v PNP OS Installed
Set this field to "Yes" if you are running W indows 95, which is PnP compatible.
It is recommended to keep the default setting. The setting values are: No, Yes.
v Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on. The setting values are: Disabled and Enabled.
vResources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select "Manual" and manually adjust interruption resources in
the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
vIRQ Resources
Press the <Enter> key, then manually set IRQ resources.
vPCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
vAssign IRQ For VGA/USB
This option is used to set whether BIOS will assign IRQ for VGA/USB. The
setting values are: Disabled and Enabled.
48
PnP/PCI Configurations Menu
Chapter 3 BIOS Description