Foxconn P4M800P7MA series User Manual page 46

OnChip SATA
v
This option is used to enable or disable onchip SATA. The setting values are:
Disabled and Enabled.
vSATA Mode
This option is used to select SATA mode. The setting values are: IDE and
RAID.
vIDE DMA transfer access
This option is used to enable or disable IDE DMA transfer access. The setting
values are: Disabled and Enabled.
vOnChip IDE Channel0/1
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose "Enabled" to activate each channel separately.
The setting values are: Disabled and Enabled.
vIDE Prefetch Mode
This option is used to enable or disable IDE prefetch mode. The setting
values are: Disabled and Enabled.
vPrimary/Secondary Master/Salve PIO
These four items let you assign which kind of PIO (Programmed Input/Output)
is used by IDE devices. Choose Auto to let the system auto detect which PIO
mode is best or select a PIO mode from 0-4.
vPrimary/Secondary Master/Salve UDMA
UltraDMA technology provides faster access to IDE devices. If you install a
device that supports UltraDMA, change the appropriate item on this list to
Auto. The available setting values are: Disabled and Auto.
vIDE HDD Block Mode
This option is used to set whether the IDE HDD Block Mode is allowed. The
available setting values are: Disabled and Enabled.
38
Chapter 3
VIA OnChip IDE Device Menu
BIOS Description