Foxconn P4M800P7MA series User Manual page 38

v Delay Prior to Thermal
This option is used to set the delay time before the CPU enters auto thermal
mode. The setting values are: 4 Min, 8 Min, 16 Min, 32 Min.
vThermal Management
This option is used to manage Prescott CPU thermal.
vTM2 Bus Ratio
Represents the frequency bus ratio of the throttled performance state that will
be initiated when the on-die sensor gose from not hot to hot.
vTM2 Bus VID
Represents the voltage of the throttled performance state that will be initi-
ated when the on-die sensor gose from not hot to hot.
vLimit CPUID MaxVal
The option is used to set limit CPUID MaxVal. The available setting values are:
Disabled and Enabled. Set Limit CPUID MaxVal to 3, should be "Disabled" for
WinXP.
vExecute Disable Bit
The option is used to enable or disable execute disable bit.
vVirtualization Technology
W hen enabled, a VMM can utilize the additional hardware capabilities
provided by vendor pool technology.
30
Chapter 3
CPU Feature Menu
BIOS Description