Exp Connections - Strymon BigSky User Manual

BigSky
- User Manual

EXP Connections

Connect an external TAP
switch for remote control
of Pre-Delay (or Decay
time with the Magneto
and Nonlinear machines).
Use a standard TRS cable
to connect the external
switch. Set the EXP MD
global setting to TAP to
use external tap.
Connect a standard TRS
expression pedal for
continuous control over
any knob. To select the
knob(s) controlled by the
expression pedal, use
the EP SET parameter
in each preset. All
knobs can be controlled
simultaneously. See
Common Parameters for
set up instructions.
Connect a Strymon
MultiSwitch for external
tap, bank, or preset
selection. Set the EXP MD
global setting to either
TAP, BANK, or PRESET.
Please refer to the
MultiSwitch user manual for
detailed setup information:
www.strymon.net/support/
multiswitch
TAP
TRS
®
OR
®
pg 5